ULTRA Command                                               
____________________________________________________________

Syntax:   ULTRA [OFF|ON] [/U]

Purpose:  Loads a subset of Laptop UltraVision(TM) for VGA,
          providing the following features:

          * Approximately 20% more text area on your VGA
            screen.
          * A screen font taller and bolder than the normal
            ROM-based font.  This SANS3 font is one of over
            20 styles supplied with Laptop UltraVision.
          * Faster text writing through a built-in BIOS
            accelerator.

          This memory resident program occupies 6K of RAM.
          The full Laptop UltraVision product takes 16K, and
          provides additional features as shown in the
          VGADEMO demonstration program.

Comments: The first time you run the ULTRA command, it loads
          and activates UltraFont (the UltraVision subset).
          You may wish to add this command to your
          AUTOEXEC.BAT startup file.

          The ULTRA /U command unloads UltraFont from
          memory, if possible.  If you have loaded other
          resident programs after UltraFont, you should
          remove them first.

          You can also turn UltraFont off and back on
          through the ULTRA OFF and ULTRA ON commands,
          without removing it from memory.

          For more information, contact:

          Personics Corp., 63 Great Road, Maynard, MA 01754
          800-445-3311 or 508-897-1575    FAX: 508-897-1947 


VGADEMO Command
____________________________________________________________

Syntax:   VGADEMO

Purpose:  Displays a self-running demonstration of Laptop
          UltraVision for VGA.

Comments: Although the demo will run from the floppy disk,
          hard disk installation is recommended for faster
          performance.

          Pressing [Escape] at any time will end the demo.

