LLgg "t<~tP>tpX pk>u9>t>t  t t} tosfPXt Pc X@=~<~2P$u ú]PQ0XPX*>tnrb >tTXH >t:>. >t< $ > udð PP$u" uð PP{$un" u^$t8P$@Xt)$tR%IDP$4Xt#P$@Xu&$u+{ú|sjaXO$t$t Ku$'u%E úp úM R tX0PXP$X$< } 07BQKC< t<t-<t$C,0r< r,:s& t Yú CS[ 12.. Interfacer 3/4 Test Program Version 1.3 Copyright 1986 Viasyn Corporation. $ Interfacer Serial ports at relative users: $ Enter user number to test or any key to test user number $ >> $ --- Not a serial port.T $ Testing Interfacer User #$ Pass # $ ** Loopback Mismatch - Sent: $ Received: $** Character was not received. Make sure pin 2 is connected to pin 3 on the RS-232. $** Transmit interrupts not received. Lost $** No flag set in transmit mask. Lost $** Receive interrupts not received. Lost $** No flag set in receive mask. Lost $. No interrupt errors detected. $. Character loop-back test had no errors. $** Character loop-back failed. Errors = $. Interfacer serial port tests okay. $ ------ PORT FAILED TEST ------ $ Continuous Mode ON $ Continuous Mode OFF $ X Mode ON $ X Mode OFF $. Hardware handshaking (CD, DSR & DTR) tests okay. $** Carrier Detect and Data Set Ready both stuck false. $** Carrier Detect and Data Set Ready both stuck true. $. RTS/CTS handshaking okay. $** RTS/CTS circuit not functioning. Make sure pin 4 is connected to pin 5. $** Carrier Detect stuck false; DSR okay. $** Carrier Detect stuck true; DSR okay. $** Data Set Ready stuck false; CD okay. $** Data Set Ready stuck true; CD okay. $Clear to EOS:Y$Clear to EOL:T$