# 
# $Copyright
# Copyright 1993, 1994 , 1995 Intel Corporation
# INTEL CONFIDENTIAL
# The technical data and computer software contained herein are subject
# to the copyright notices; trademarks; and use and disclosure
# restrictions identified in the file located in /etc/copyright on
# this system.
# Copyright$
# 
 
"test14a" README
==============

Source: node.c errexit.c

Desc:	test to write with "feov" (force end of volumn) call              

Invoke:	load [0] node.rx [/cfs/ctape0 [TEST01 [TEST02 [TEST03 [TEST04
			  [TEST05 [TEST06 [TEST07 [TEST08 [TEST09]]]]]]]]]]

Note:	* use 11 to 32 scratch tapes
	* log is on "test14a.SLr0"
	* result is on "test14a.SRr0"

Algo:	* tapealloc 
	* tdsopen, twrite, feov, tdsclose for 11 to 32 datasets depending on
	  the TESTNUM1, TESTNUM2, and TESTNUM3 values.  If (1,0,0), then
	  only 11 datasets.  If (1,1,0), then 21 datasets.  If (1,1,1),
	  then 32 datasets.
        (since the program only store vol/serial numbers TEST01 to TEST09,
	 the user need to respond to the program with TEST10 to TEST32, one
	 at a time, when it ask for vol/serial number.  Also the user need 
	 to put the corresponding tape on the cabinet, but NOT load it 
	 a because the program will auto load the tape)
	* tapedealloc 
	* IMAX = 101
	  JMAX = 4
	  ZEROREAD = 1
