# 
# $Copyright
# Copyright 1993, 1994 , 1995 Intel Corporation
# INTEL CONFIDENTIAL
# The technical data and computer software contained herein are subject
# to the copyright notices; trademarks; and use and disclosure
# restrictions identified in the file located in /etc/copyright on
# this system.
# Copyright$
# 
 
"test14a" COMMENTS
================

******************* Step to run this test *******************************

1. make -f makefile.man all

2. <testname>.sh 
Note: Since the program needs 11 to 32 tapes (depending on the source TESTNUM1,
      TESTNUM2, TESTNUM3 values) and the cabinet can at most hold 9
      at a time, the program will prompt the user to put 8 tapes in the 
      cabinet at a time to make scratch tapes.  This will take about 20 
      minutes.  Then the program will prompt the user to prepare the 1st
      9 tapes on the cabinet and load the 1st one.  Then the user will hit
      RETURN.  After the program finishs writing these 9 tapes, it will
      prompt the user for the "vol/serial" (volumn/serial number).  The
      user need to manual put each tape on the cabinet (DON'T LOAD IT IN)
      and answer the question with "TEST10" to "TEST32" one after one.


      THE TEST TAKES ~30 MINUTES TO RUN




