Help for Add Printer

This window lets you add a printer to the secure configuration.  The
printer should already have been installed using the manufacturer's
installation guide.

Enter the printer name in the Printer Name field.  This should be similar
to the device name in the /dev directory (such as Laser1).

The Device List is a list of device names that correspond to the
printer name.  The device name is the physical device associated with the
printer.  For instance, if you have a printer which can run at 6 pages/
minute or 8 pages/minute you may have two different devices /dev/Laser1pm6
and /dev/Laser1pm8.  Enter these names in the Device List window.  If you 
do not enter a device name then the name /dev/<printer name> is assumed.

#ifdef SEC_MAC
You can configure the printer to be either single-level or multilevel for
sensitivity levels, and single-level or multilevel for information levels.
Click on the toggle buttons to set the device level.

If the device is configured for a single-level sensitivity level, then
the Modify Multilevel Minimum SL and the Modify Multilevel Maximum SL
menu options are dimmed on the Modify Device cascade menu.  If the device 
is configured for multilevel sensitivity levels then the Modify 
Single-Level SL option is dimmed.  

#ifdef SEC_ILB
If the device is configured for multilevel information levels then the 
Modify Single-Level IL menu option on the Modify Device cascade menu is 
dimmed.

#endif /* SEC_ILB */
You may cancel the window at any time by selecting the "Cancel" button.  
Selecting the "OK" button brings up a confirmation box so that you can 
confirm your actions.  
#endif /* SEC_MAC */
